Fox Srl Home page  |  Accumulators   |  Measurement and control instruments  |  Accumulators software   |  About Us   |  Contacts
 Members Area
User ID
password
Remember me
 Product search
 

Accumulators

   Bladder type

   Membran type

   Piston type

   Inox steel type

 Accessories

Diaphragm vacuum pump
Diaphragm vacuum pumps is regularly used in order to pre-charge the suction dampeners that are working in atmospheric pressure condition. The principle of operating is considering a flexible diaphragm in the pump head that is moved ...

Pressure reducers
The pressure regulator is used to adjust the precharge pressure between the nitrogen cylinder and the accumulator. For the operators safety, when using nitrogen gas cylinders, it is necessary to install a pressure reducer. It allows ...

Safety blocks
These safety devices, which are essential to preserve the accumulator from phenomena of over-pressure, are provided of a valve of maximum pressure settled in the factory at different values and of a discharge valve which is available ...

Accessories oil side VSA+VS+NS
These valves are mounted in order to protect the accumulator in case of gas overpressures higher than the value of the maximum allowable working pressure. So the calibration of the valve must be equal or lower than this value.

Clamps and brackets
Designed for specific use on accumulator installation, both clamps and brackets are supplied complete with rubber support to ensure rigid mounting.

Filling and control device AR
The equipment of preload AR is an essential tool for the operations of control and restoration of the pressure of the nitrogen in the accumulators/dampeners. Maximum working pressure: 1000 bar Body: in zinc-plated steel Standard ...

Spare Parts
Bladders and Diaphragm

Filling and testing ARM28
The equipment of preload ARM28 is an essential tool for the operations of control and restoration of the nitrogen pressure into accumulators.

Accessories gas side VG+DR+KIT
These valves are mounted in order to protect the accumulator in case of gas overpressures higher than the value of the maximum allowable working pressure. So the calibration of the valve must be equal or lower than this value.

   Instructions

Whole accumulators catalogue in a single PDF file (ZIP File 1.70 Mb)
right click and select "save object as". Winzip required www.winzip.com

 


Italiano Francais Espaniol